*New and improved formulation for normal hard surface flooring
*Cleans, shines and increases slip resistance
*Contains no solvents or abrasives
*Non-flammable, will not burn
*Fully bio-degradable

Concentrated, all natural soap detergent for use on all hard surface flooring. Cleans, protects, shines and dramatically increases slip resistance - in one application. Use in automatic scrubbing machines or mop on. No rinsing is required. Floors may be buffed or burnished without affecting the anti-slip properties. Certified for slip resistance by Underwriters Laboratories in the recommended use dilution. Actually increases the coefficient of friction on slippery surfaces such as polished tile floors. Especially recommended for high traffic areas where slip and fall accidents occur. Non-film forming,R20 will not build up with repeated use.  Testing on polished porcelain tile by the Ceramic Tile Institute resulted in a 10% to 45% increase in the static coefficient of friction depending on the shoe sole material and wet or dry conditions.

Key Benefits

• Reduce Slip Fall Accidents
• Reduced liability costs
• Increased productivity
• Cleans & Polishes Floors
• Can be buffed to a gloss
• Reduced Costs. concentrated 3-4 ounces / gallon of water
• Non-Acid & biodegradable.

Test Results.  A year long  study demonstrates that our recommended Slip Control Program not only cleans floors, but reduces slip fall accidents and reduces material costs.

• Study results show a 62% reduction in Slip and Fall Accidents for a one year study period after implementing the recommended floor maintenance program using R20 .

• Cleaning product usage declined by 18%  after implementing the recommended R20 cleaning procedures. 

• Call for this specific procedure.  877-885-7527

In House Testing has shown vinyl composition tile (VCT) when treated with R20 increases the static coefficient of friction 29%.

How The Major Household Floor Cleaners Stack-Up   tested by The National Floor Safety Institute

Pricing Call 877-885-7527 to Order

Slip Control Procedures using  R20
Use on hard surface, rigid and resilient flooring (Terrazzo, Marble, Granite, Ceramic Tile, Vinyl, Conductive Vinyl, Rubber Vinyl, Vinyl Composition Tile, Cement, wood and other hard surfaces).   Mop the floor, DO NOT RINSE.

• The floor should be swept of all dirt and debris.

• Start by adding 3 to 4 ounces to one gallon of water for normally soiled floors (estimated 4500 square feet of coverage per gallon). adjust up or down based on your conditions.  If heavily soiled or slippery, a higher concentration should be used.

• Using a mop or walk behind auto-scrubber, thoroughly wet the area, agitate where needed (allow for dwell time), and pick up.

• Do not rinse.  You are finished.

• To increase the shine, buff the area with a white or red nylon pad or a buffing brush. Buffing will repair scuffs

• You can spray buff using 6 ounces of R20® to 26 ounces of water.  Maximum slip resistance & shine can be achieved buy burnishing as you spray R20.